Outside 2 page layout

Hey everyone,

Today I have a 2 page layout to share. I cut the circle, title, and stars with my silhouette. I made the flower myself with tulle and a button and the banner toward the bottom is ribbon. The 2016 banner is on pop dots.

I'm entering this layout into the following challenges:
Simon Says - Flora and Fauna (flora - the flower)
DL.ART - Anything Goes
Clique Kits - Anything Goes
My Creative Sketches - June sketch

Thanks for stoppin' by and have a great day!

Imaginisce 2012 Disney Layout

Hey everyone,

I have this cute Disney layout to share with you.

The pics are from our winter 2012 Disneyland trip. I cut the Mickey head and ears with my silhouette cameo. The papers are from the Imaginisce Scooters Vacation line. I added a red button to the bottom Mickey head and 2 red sequins on the sides of the title. "2012" title is Thickers. 

I am loving this layout. I find the simplicity and clean colors very appealing. 

I am entering this layout into the following challenges:

Clique Kits - Aything Goes

DL.ART - Feb Linky

Simon Says - Inspired by a Song ( 2012 - Jay Sean) 

Scrap Much - Feb Colours (I used red, yellow, aqua, & black)

Imaginisce - Feb Sketch 

Thanks for stoppin' by and have a great day!

Presents Layout

Hey everyone...

It's getting pretty close to Christmas. I'm surprised I've had a chance to scrap recently :). Today I am sharing a Christmas layout of me & Harmony.

I followed the sketch for DCWV December stack-a-holic challenge.

I used the Sparkling Holiday stack.

I cut the snowflakes, title, and ornaments with my Silhouette. 

The triangles and tag were cut by hand.

I love all the shiny gold on this layout.

I tied on some wired gold ribbon on the tag, which is on pop dots.

The circular gold cut by the title is an Imaginisce punch.

I'm entering this layout into the following challenges:

DCWV - Dec Stack-a-holic

Scrap Our Stash - D-I-E-C-U-T-S (D= dcwv, I=imaginsce punch, E = eyelet punch, C= cameo, U= unraveled ribbon, T= tag, S= snowflakes)

Clique Kits - Anything Goes

Scrap Around The World - Dec mood board

Thanks for stoppin' by and have a great day!

1 Month Harmony layout

Hi everyone!

Hope you all had a great Thanksgiving and you're having a safe Black Friday.

Today I would like to share this layout of my youngest daughter Harmony.

The blue butterfly background was cut down to size and then I cut the title out with my silhouette. I placed my 2" wide Coral Nylvalour Velvet Ribbon under the title and put the background title paper on pop dots.

I cut the hearts out and added them in place as well as the little banner. I finished the layout off with a wood veneer heart next to the heart at the bottom and added my journaling in white gel pen. I hope you enjoyed looking at my layout today!

I am entering this layout into the following challenges:

Clique Kits - Anything Goes

Thanks for stoppin' by and have a wonderful day!

Cheesecloth Ghost

Hey everyone,

Today I want to share a cute halloween ghost decoration.

The ghost is pretty easy to make and super cute when done. All you need is some black felt, cheese cloth, liquid starch, scissors, hot glue, and 5/8" red wired satin ribbon. You will also need something for a form to sculpt ur ghost (i used a balloon and a vase).

You soak the cheese cloth in the liquid starch than drap it around a form or base to make the shape. Let dry over night. Remove from base/form. Cut eyes out of felt and hot glue into place. Make a bow with your ribbon and hot glue into place. All done!

Thabks for stoppin by and have a great day!

1st Day Layout

Hey everyone,

Today I am sharing a layout of Jayden's first day of Kindergarten.

All papers are Doodlebug. The little fabric cut outs (the glue, star, and apple) are left over fabric from Jayden's 1st day outfit that her Aunt Rachel made special for her to wear. The buttons are from my stash. The little red backpack button is on pop dots (its adorable! I LOVE IT!). The title is Thickers and the ribbons are both from my stash.

I am entering this layout into the following challenges:
My Creative Sketches - Sketch
Clique Kits - Anything goes

Thanks for stoppin' by and have a great day!

Ribbon Bookmark

Hey everyone, 

today I'd like to share a ribbon bookmark. 

For this project all you really need is ribbon, scissors, a button, an elastic hair tie, needle & thread (or a sewing machine), and hot glue & hot glue gun (optional).

I used 5/8" red wired satin ribbon and 11/2" navy blue mini stars wired ribbon. 

This bookmark is such an easy project. If I hadn't hand stitched it probably would have only taken 15 mins. My hand stitching skills used to be decent, but I haven't hand stitched in quite awhile. My stitching was less than beautiful, so I hot glued red ribbon over it and it looks pretty good now!

Let me give you the easy steps real quick... 

1. Cut ribbon to size (size depends on book... measure around and have a gap between the ends of about 2 - 3 inches.

2. place elastic band on one edge about an inch in and fold ribbon over the elastic.
3. stitch the end of the ribbon thats folded over the elastic making a loop out of the ribbon that traps the elastic in.
4. on the other end of the ribbon sew on a button. DONE!

 (optional steps if you want to clean up the edges)

5. fold back the ribbon edge the button is on toward the inside and hot glue down.
6 wrap a different ribbon over the stitches from the elastic.

I hope you guys enjoy this project and give it a go yourself.

Thanks for stoppin' by and have a great day!

Easy No Sew Ribbon Head Band

Hey everyone,

Today I have a no-sew ribbon head band to share.

The supplies you will need:

7/8" Double Ruffle Lavender Ribbon

Gray fold over elastic smaller than your ribbon (any color you like will work)

Hot glue gun

Hot glue stick(s)

Scissors

button or something similar to put in the middle of your flower (optional)

grip shelf liner (optional for lining the inside of the ribbon to help it stay in place on the head)

Step 1.

Measure out your ribbon by putting it around the head it will be going on. Cut it a few inches shorter than the full amount to go around the head.

Step 2.

Measure your elastic by putting it with the ribbon and fitting it around the head. You will want to make it so that it has to stretch to fit around the head (so that it stays on).

Step 3. (optional)

Here is where you would make your flower. To make the flower take the ribbon and pleat it in a circle while adding hot glue to the center to hold it down. Continue this until the circle is complete. Once the circle is finished hot glue a button (or item of your choice) to the center of your circle. Once your flower is finished hot glue it to the ribbon and place it wherever you want it (I choose to go off to the side slightly).

Step 4. (optional)

This is where you would line the inside of your ribbon with the grip shelf liner. Draw a line of hot glue on the inside of the ribbon a little at a time and push your liner down into the glue line. You will want to have the liner run the length of your ribbon.

Step 5.

Add a hot glue line at the end of the ribbon on the inside and place one end of your elastic on it. Than do the same to the other side of your ribbon and elastic making sure not to get it twisted.

Step 6.

Enjoy your new headband!

Thanks for stoppin' by and have a great day!

Keep Calm & Love Harmony Layout

Hey everyone,

Today I have a 2 page baby girl layout to share. These are pics from Harmony when she was first born and had some visitors in the hospital.

All of the gold (title, hearts & dots) around the page are gold vinyl. All cut with my Silhouette Cameo. The pocket page inserts are from a few different collections. I don't even know for sure which but I believe 2 of them are project life and the other one I'm not sure about. I cut the strips of paper (gray, mint, & yellow) with a paper trimmer and added some yellow baby ribbon across the yellow paper strip on the bottom.

I am entering this layout into the following challenges:
Scrap Much - Gold Color challenge
Clique Kits - Anything goes
Let's Capture Our Memories - August color spot 
Challenge YOUrself - #21 Keep Calm and ______ (I am the one holding Harmony on the first page)

Thanks for stoppin' by and have a great day!

Newport Open Sea 2 Page Layout

Hey everyone,

Today I have a 2 page scrapbook layout to share. One of my favorite ways to use ribbon on a layout is to use it as banners. I used the Dark Mint Lyon Wired Ribbon in 1-1/2 in to make the banner on the top right of the layout. I just cut banner shapes by and out of the ribbon and adhered with ATG tape. I made sure that the tops of the banners had the wired edge to help me bend them into shape to make a curve. 

I used the 1-1/2 in Dazzle Grosgrain ribbon in Tropic Blue to line the bottom of my pictures. I also added some over a couple different photos and one of the purple paper edges as photo corners. Over the bottom part of the dazzle ribbon I added a strip of Lavender 7/8 in Double Ruffle Ribbon. For both ribbons on the bottom I cut to have a banner/pennate shape on each end. To do this and have them the exact same you take the ribbon and fold over the ends (so that with the ruffle ribbon the ruffles from top and bottom touch), and then cut at a diagonal slant going up and in toward the middle of the fold.

I cut the title out using my Silhouette Cameo and added some different color sequins that matched the rest of the page around the edges of the title (in hopes they would resemble bubbles). I hope you all enjoyed my layout.

Thanks for stoppin' by and have a great day!

Patriotic Hair Bows

Hi everybody,

This is Jamie and today I want to share some easy to make hair bows with you all. These bows are perfect for 4th of July!

Here is a list of the things you will need to make these bows:
Alligator clips (one per bow)
Hot glue gun
Hot glue sticks
Scissors
5/8" red wired satin ribbon
11/2" navy blue mini stars wired ribbon

It took me less than 30 minutes to make these bows start to finish. I made a (hopefully) easy picture tutorial for you just in case.

Step 1.
Cut ribbons to size. I cut the navy star ribbon at aprox. 11 inches and the red approx. 3 inches.

Step 2.
Take your blue star ribbon and gate fold until the ends overlap (make sure to have them overlap enough for a line of glue to hold them together).

Step 3.
Hot glue a line across one of the edges and then press the two edges together to make a continuous piece of ribbon (it should look like a circle or bracelet shape once unflattened).

Step 4. 

Flatten the ribbon you just glued together and grab in the center of the ribbon and pinch together.

Step 5.
While still pinching the center of the ribbon, use your other hand to fold the top and bottom of the pinched area to the back (so that the center now makes a "W" shape). At this point you can hot glue to hold it together or use some twine/thread and tie it in this position if you like.

Step 6. 
While holding the center in a "W" shape (you won't have to hold it if you've tied the center in this position) take your red ribbon and wrap around the center to hide the fold. (The 3 inches is enough to wrap around 2x. If you only want to wrap around once cut off the excess now).

Step 7.
Now secure the red ribbon with hot glue (making sure your ribbon seam end is on the back side of your bow).

Step 8.

Now hot glue your alligator clip (or hair piece etc. of your choice) to the back side of the bow. Make sure you line it up in the middle so that you can't see the clip from the front.

See, I told you easy! I hope my tutorial was easy enough to follow.  Thanks for taking the time to view my project today!

Thanks for stoppin' by and have a great day!