Post-it Paper Blog Hop (Shaker Card)

Sorry for the wrong date but I couldn't figure out how else to make this go above my other sticky post!

If you came here from Carissa's Blog than you're in the right place! If not, hop on over to SweetSassyDiva for the full lineup!

This is my first shaker card (done right, second ever). I hope that you enjoy it.. it did take some time (mainly because this was m first attempt to do a shaker card correctly).

Recipe:

Doodle Charms

Create A Critter

Snowflake pattern paper

White foam

White Post-it paper

Glacier Post-it paper

Sunshine Post-it paper

Clear paper/plastic (I used the old cover from a Cricut mat)

Blue Glaze pen

Blue ink pad

Adhesive

Blue Scribbles 3d paint

Black Scribbles 3d paint

White Scribbles 3d paint

Blue glitter

White glitter

Clear/White tiny glass beads

6.5 x 5 white premade card

Instructions:

Using Doodle Charms cut out the snow globe at 4 inches using the White Post-it paper and using the Glacier Post-it paper cut out the globe using shift at 4 inches. Using Create A Critter cut out the main penguin in White Post-it paper at 2 inches and the beak and feet with the Sunshine Post-it paper at 2 inches. Take the black Scribbles 3d paint and paint the area of the penguin that should be black (you can fallow the cut lines) and the eyes. Then use the White Scribbles 3d paint to paint the area of the penguin that should be white (this gives some texture). Peel the Sunshine beak and feet and adhere to the the penguin.

With the snow globe, use the White Scribbles 3d paint to paint a little snow mound on the bottom of the inside of the white globe and also some snowflakes or dots around the globe area. Take the Glacier globe and cut out the center leaving a small outline. Place the Glacier globe on some white foam and trace the outline. Cut the white foam so that it fits under the Glacier outline without showing (making sure there there is no gaps, this must be solid to hold in your beads and glitter). Adhere the Glacier boarder to a clear sheet of plastic (I used an old Cricut Mat protective sheet) and cut off the excess. Adhere the foam outline to the plastic (making sure it does not show through the other side).

Once your Scribbles paint is dried on both your globe and penguin, peel off the backing and adhere the penguin to the middle of the globe (the white main globe). Put some beads and glitter over top of the penguin. Adhere the top of the globe (I used ATG tape since it does not have to dry and can leave a solid line of adhesive) to the white globe and its done!

Now, adhere your snowflake paper to the cover of the card and adhere the globe on top of that. Cut a small circle (I did this by hand) out of the Glacier Post-it paper and ink the edges with blue ink. Then write your sentiment on that and adhere it down to the top area and your card is done!

Now.. what would a hop be without candy?! I have the above stamp set to giveaway. To enter for a chance to win all you have to do is:

1. become a follower

2. post a comment on this post by Sunday December 5, 2010 @ 11:59 PM PST

Thats it!! Super easy! I will choose a winner on Monday December 6, 2010 using Random.org. I will also announce the winner on December 6 right here on my blog. If I do not hear from the winner within 48 hours (this will be around mid Wednesday, Dec 8) I will choose a new winner! Good luck everyone!

http://sweetsassydiva-gspot.blogspot.com/ SweetSassyDiva

http://creationswithbecka.blogspot.com/ Rebecca

http://loksico.blogspot.com/ Carissa

http://babyjaydensmommy.blogspot.com/ Jamie you are HERE

http://laura-imaginewhatyoucando.blogspot.com/ Laura is NEXT

http://scrapbookaholicbyabby.com/ Abby

http://almabrooksblog.blogspot.com/ Alma

http://kristinscraftykitchen.blogspot.com/ Kristin

http://mymentalinstability.blogspot.com/ Jennifer

Now hop on over to Laura's Blog to check out her beautiful project!

Also don't forget to enter for a chance to win My BIG Candy!

Thanks for stopping by and have a great day!